Loading fleece on the frame

fleece loaded on the NEQ2 quilting frame

When I use fleece instead of backing and wadding I only need to load 2 layers on the frame. 

This tutorial shows how to load a quilting frame with just 2 layers; the quilt top and the fleece backing that also serves as the wadding or batting. 

Because fleece acts as wadding AND backing, it's a real money-saver!

New English Quilter ratchets

 Look at the ratchet ends of the NEQ fabric poles.

They're labelled 1, 2 and 3.

Here they are in the frame; 

number 1 is closest to you as you stand by the sewing machine

 number 2 is in the middle and number 3 is farthest away.

notice the ratchets are on the right hand side of the fabric poles

 You are going to begin with fabric pole number 3, the pole farthest away from you.

Add caption

Take the 3rd fabric pole out of the end pieces and bring it to the front of the frame. This is to make it easier on your back, so you are not bending over the frame to do the pinning. Be sure to keep the ratchet end on your right hand side. On this third fabric pole notice that the leader fabric is coming over the top of the pole.

Fold your fleece in half to find the centre and match the centre of the fleece to the centre line marked on your leader fabric.

Butt the two ends together, with the right side (good side) of the fleece facing down, 

keep the good side of the fleece facing down

pin from the centre outwards, 

Notice that you are pinning to the back side of the leader fabric. This will keep you from stitching the fleece to the leader fabric by mistake later on when you are quilting.

Carry on pinning all the way to each end of the leader fabric. 

When you get to the end use two pins or a saftey pin.

 Most of the tension will fall on this last pin. Doubling up or using a safety pin will keep the final pin from bending under the pressure.

Now roll your fleece onto the fabric pole smoothing it out as you go,

and drop it back into position on the frame. That's the third fabric pole all loaded.

It should look like this. Good. Now on to the second fabric pole.

You are going to treat the 2nd fabric pole 

exactly the same way as you did the third:

• take the 2nd fabric pole off the frame 
• and bring it to the front of the table so you don't have to lean 
• Fold your top to find the centre. 
• Pin the centre of the top to the centre of the leader, 
• butting the two ends together so the back of the quilt top is smack against the back of the leader.  

Pin all the way from the centre to both ends. Finish with 2 pins or a safety pin. Roll the fabric onto the poll, smoothing out as you go along and drop the number 2 fabric pole back in the middle slots on the frame.

Now you are going to go back to the fleece on the third fabric pole. 

Disengage the ratchet so you can pull the fleece forward, 

Fold the fleece in half to find the centre 

and pin the centre of the fleece

to the centre line on the leader fabric on the first fabric pole.

This time you are pinning to the TOP of the leader. Use the line of stitching sewn on the leader fabric to help you align your fleece nice and straight. Take care not to stretch the fleece. Pin from the centre outwards to each end and finish with two pins or a safety pin.

Now re-engage the ratchet tension and tighten the fleece between the 1st and 3rd fabric pole. This makes a sort of table. Finally you will pull the quilt top fabric from the 2nd fabric pole forward and pin it about a centimetre higher than the line of pinning on the fleece. Smooth it out as you go.

If you like you can slip an IKEA ironing board on the table under the loaded quilt sandwich and give it one last iron. Now you're all loaded and ready to start your quilting!

Follow this link for directions on loading 3 layers; of top, wadding and backing fabric. If you have any questions this earlier post may help.

Pinning the Purple Pumpkin Seed Quilt

a three layer quilt sandwich on the New English Quilter frame

This post features a new pinning method not yet in our New English Quilter Handbook. I've been demonstrating this pinning method to our customers coming to collect their New English Quilter frames. So I thought it would be good to have a pinning tutorial to refer back to.

The ratchet ends of the fabric poles are labelled 1, 2 and 3

Notice that the ratchet ends of the fabric poles are labelled 1, 2 and 3.

a side view of the numbered fabric poles

Intro:  The first fabric pole is closest to you as you stand by the sewing machine. The second is in the middle. And the third is farthest away from you. Each layer of your quilt sandwich will be pinned to the first leader on fabric pole #1. The other end of the backing fabric will be pinned to the third leader on fabric pole #3. The other end of the quilt top will be pinned to the second leader on fabric pole #2. The wadding will only be pinned to the first leader, then it will go over the backing fabric and under the quilt top and hang down the back of the frame. Before you start, for ease of pinning,  I suggest taking off the sewing machine and the carriages and putting them to one side out of the way. 

Bring fabric pole #3 to the front of the table.

1.With this new pinning method, the last shall be first! We begin with the 3rd fabric pole. Leaning over the frame to pin onto this 3rd leader makes my back sore!! This new method is much easier to do and kinder to my back. Take the 3rd fabric pole off the frame and bring it forward to the front of the table. Keep the ratchet end to the right of you and notice that the leader fabric is coming OVER the TOP of the fabric pole. 

Butting the two ends together, pin to the back side of the 3rd leader

Loading a quilt sandwich on the frame is a centring process. Hold your backing fabric so that the right side is facing downward. Now find the centre of your backing fabric and match it to the centre mark on the BACK of the third leader. You're going to butt the two ends together and pin from the centre outwards.Carry on pinning all the way to the end. I usually use a safety pin at the end. 

I use a safety pin for the last pin here

The frame tension can sometimes bend the straight pins but the safety pin is strong enough to cope without getting bent out of shape.

pinning the backing fabric while sitting down at the table

If it's more comfortable, another option is to do the pinning sitting down at a table. Just remember to keep the ratchet end of the fabric pole to your right and make sure that you've got the leader fabric coming over the top of the pole. Now drop your 3rd fabric pole back on the frame, in the slot furthest away from you. It will look like this. You have finished step one!

the backing fabric is pinned to the 3rd leader

2.  Now for step two. First take the 2nd fabric pole off the frame and put it to one side out of the way. We'll come back to that pole later. Now pull the backing fabric from the 3rd pole forward to the first fabric pole. Find the centre and pin it to the centre mark stitched on the leader fabric, This time you pin to the TOP of the leader, aligning the backing fabric to the stitched line on your leader, just like in the photo below.

find the centre and pin along the stitched line

 Pin from the centre all the way to both ends.

pin to the end and finish with a safety pin

Now tighten your frame tension and you will have made a platform with your backing fabric, like this...

pull the backing fabric forward and pin it to the first leader to make a platform

 Now take your wadding and throw it over the back of your frame.

throw your wadding over your frame so it falls down the back

centre it , smooth it out and pin it

stagger the layers about a finger's width

Notice how the layers are staggered just a bit so you can still see the pins from the first backing layer. Good, now you have finished the 2nd step. 

3. Now you will pin the top. Go find the 2nd fabric pole, You are going to pin the back of the quilt top to this 2nd fabric pole. Treat this the same way as the 3rd pole. You can pull this pole forward or sit down at the table, remember to keep the ratchet end on your right but this time the fabric goes under the pole.  Find the centre, butt the ends together and pin to the back of the leader, starting in the centre and pinning toward both ends. When you're finished, drop the pole back in the frame. Now pull the quilt top toward the first leader, over the platform made by the first two layers. Once again leave a finger's width of space and then pin in place finishing with a safety pin at both ends.

All the layers of the quilt sandwich pinned to the first leader

the centre marking helps to centre your fabric layers

Once all the layers are loaded on the frame put the carriages back on the tracks and take the first fabric pole off the frame and slip it through the arm of the sewing machine and through the slots on the side arms.

Slip the first fabric pole back under the arm of the sewing machine

 Now you are ready to roll!

The fully loaded frame.